How to save model data on RC8X and paste it into another RC8X?
Model data and system settings of RC8X can be saved and then pasted into another RC8X.
1）Keep the RC8X off.
2）Use a USB cable (Type-c) to connect the RC8X to the computer.
3）Push the DT1 and DT2 TRIM buttons to the middle position, and long-press the power button at the same time to enter into the data copy and upgrade mode. The following four options will appear on the screen, and "USB MODE" is selected by default.
4）Short-press the "power button" to enter the USB mode. The computer usually displays two removable disks. RC8X_EXT refers to the SD card, and RC8X_INT refers to RC8X. Model data and system settings are in the RC8X_INT disk.
5）Open RC8X_INT, there are the following 2 files. model folder refers to model data, and system settings.bin refers to system settings. Both files can be copied directly.
Double-click to open the model folder. There is a bin file of each model. You can copy any model data individually.
For a video tutorial on how to copy the file of RC8X, you can refer to the link here: