F121 VS Toy Plane | ||
Functions | F121 | Toy Plane |
Altitude Holding | F121 flight with accuracy altitude hold even through narrow space or no matter how close to the surface (less than 10 centimeters height) | cannot to flight fast and cannot keep Altitude Holding when close to the surface |
PID Autotuned | rise and descend at high speed even with Altitude Hold Mode | keep stable reply on slowly speed |
FHSS, 67 channels pseudo-random frequency sequence | better anti-interference ability to both the same frequency band and different frequency bands, worry-free for more than hundred pilots competion at the same competition terrain at the same time | can not more than three pilots competion at the same competition terrain at the same time |
Professional Transmitter | 2000 meters control distance, FPV racing freely at any flight environment | 100 meters control distance |
Noise Reduction by Software | not only enables the motors of F121 to work without noise during the flight but also makes them more responsive and efficient than traditional 8520 coreless motors, ensures a longer life span | too much noise when flightserious heating makes the motors with short life span |
FPV Image Transmission System | The image transmission system that integrates camera and OSD module, ensuring voltage, flight time, power real-time feedback, stable transmission with more than 600 meters telemetry distance and good video photography. | can not FPV racing because of the delay of the image transmission module |
FPV Image Transmission System | RadioLink professional transmitter for racing drone | |
Flight controller with altitude holding by inertial navigation designed for racing drone | ||
Carbon fiber and plastics | ||
FULLYMAX battery, 10 minutes flight time | ||
GEMFAN Propeller | ||
EWRF Tech image transmission system that integrates camera and OSD | ||
Hawkeye FPV Monitor: 4.3 inch, 5.8GHz, and forty-eight channels FPV display with receiver integrate, with the resolution of 480*3(RGB)*272, the aspect ratio of 16:9 and response time of 10ms. | ||
Micro Racing Drone Comparison
F121 VS F121 Pro | ||
Model | F121 | F121 Pro |
Picture |
|
|
Flight Mode | AltHold Mode(Low-Speed)AltHold Mode(High-Speed)Stabilize Mode | AltHold ModeStabilize ModeManual Mode |
The angle of camera can be adjustable or not? | Can not | Adjustable, 15 degree or 0 degree. |
Voltage Output Port for Timer | No | Yes, have one |
Arm and Disarm | Arm by push the throttle joystick to the lower right corner Disarm by push the throttle joystick to the lower left corner | Arm or Disarm by press the Switch of CH7 |
F110S VS F121 | ||
Model | F110S | F121 Pro |
Picture |
|
|
Camera Protector for Image Transmission | The antenna of image transmissionwithout protector may be cut bythe propellers or easily broken off. | The newly designed cover with specially developedmould ensures the fixed position of camera andantenna funtion and avoids the possible damagecaused by putting in and taking out of the pack. |
Propellers Protector | Props protectors directly installed on the motors. The possible collision may make motor leaned or rip out motor wires. | The props protetors installed on the frame protect the props against collision and avoid the problems of bumping motors or ripping out wires caused by direct installation on motors. |
Soft material limits the protection effect. | The developed mould strengthen the props protectors and the square design prevents pilots from being hurt by propellers. The pattened dual notches make (un)installation easy. | |
Propellers need to be uninstalled first each time to install the protectors, making propellers loose and steps annoying. | Dual notches installation reduces the tear and wear caused by repeatedly (un)installing propellers and ensures easy assemly. | |
Motor Crashproof | Two thirds of the motor is exposed, making it easily get bumped and affecst the flight. It requires manual adjustment of the motor position from time to time. | Two thirds of the motor is covered by the protector and ensures better persistence to possible collision and stable flight. |
Battery Fixer | Battey fixed with rubber band and easily drops if bumped | The black plastic fixer at bottom ensures battery well |
Battery Connector | JST connector, difficult to plug in and disconnect | PH2.0 connector, easy to plug in and disconnect |
The battery wire to the flight controller would be easily broken after multiple pullings | The improved PCB design guarantees the battery wire weld to the flight controller and it won't be easily broken. | |
简体中文
English