12-Channel Transmitter

RadioLink T12S

Small Controller·Total Command


Full-proportional 12 Channels

Built-in Simulator Function

Intelligent Customizable Voice announcements

freeRTOS+LVGL

2-inch High‑brightness Display

Real-time Telemetry

Supports External Nano Module

Industrial-grade Anti-interference Technology

Full-Proportional 12-Channel Design Unleashes Limitless Creativity


12 independent proportional channels comprehensively cover the operational needs of fixed-wing aircraft (flaps/landing gear/throttle) and multi-rotor aircraft (gimbal/camera/lighting). Precisely supports the choreography of complex aerobatic maneuvers and allows for the addition of custom modules such as deployment devices and mapping equipment. Each channel is independently programmable, transforming your model aircraft from a mere flying tool into a unique and personalized creative platform.

Intelligent Customizable Voice Announcements


No need to constantly stare at the screen; you can monitor key statuses such as battery voltage, signal strength, and flight mode in real time via voice commands. This allows you to focus on the flight itself, making control more effortless.

freeRTOS + LVGL: Smooth and Future-proof


Using the industry-leading freeRTOS embedded system, it can be kept in sync with the latest requirements at any time and supports unlimited upgrades. Combined with the LVGL graphical interface, it offers a silky-smooth and superior user experience. Compared to the discontinued CO system used in some high-end remote controls,freeRTOS offers greater functionality and higher efficiency, achieving performance on low-resource processors that previously required high-resource processors, perfectly balancing performance and cost.


2-inch High‑brightness Display


High‑brightness, high‑contrast display technology remains sharp even in strong outdoor light.

Key data is visible at a glance, preventing distraction from looking away from your aircraft.


Industrial-Grade Anti-Interference Technology


Based on RadioLink's proprietary communication algorithms (widely used in robotics, automotive, security, and other industrial fields), the T12S further optimises response speed and fault tolerance. High‑performance RF modules, combined with frequency‑hopping spread spectrum, automatically avoid interfering bands in complex electromagnetic environments. Even when multiple transmitters operate simultaneously or strong interference sources are present, the link remains stable, effectively eliminating the risk of loss of control due to signal drop.


Support for the External Nano Modules


Fully compatible with popular nano‑size modules such as ELRS and Crossfire, allowing FPV aircraft parameters to be adjusted directly on the transmitter. The operating system supports one‑click upgrades via module script files, bringing together RadioLink's user‑friendly interface and the rich features of open‑source modules. A single T12S lets you try different protocols at low cost and easily adapt to different aircraft – perfect for field meets where you can fly multiple models with just one transmitter.

Real-time Telemetry


Displays real‑time critical parameters such as battery voltage, signal strength (RSSI), channel outputs, etc., in either numeric or graphical format. Real‑time low‑voltage and signal fluctuation warnings keep you fully aware of your flight status.

Built-in Simulator Function

Supports Wireless and Wired Simulators


Supports both wireless and wired simulator modes, enabling indoor practice anytime. Training continues even in rain, snow, or extreme heat–skill improvement is not limited by weather.

Built‑in Simulator Function


No external dongle needed. Simply connect via Type‑C to your computer and use open‑source simulators such as TRYP FPV, AeroFly, Uncrashed, Liftoff, FPV LOGIC, Velocidrone (Black Sheep Simulator). Works with both macOS and Windows.

Traditional Wired Simulator Mode


Compatible with RealFlight, Phoenix, Aerofly, and other simulators (requires an external dongle).

Wireless and Wired Trainer Functions


In addition to the traditional wired trainer mode, the T12S innovatively supports the wireless trainer mode. Within 600 metres, the instructor can move freely without standing and running for the whole lesson – a true liberation, making teaching no longer a "laborious task".


Traditional Wired Trainer Function

Innovative Wireless Trainer Function

Ergonomic Design


Equipped with 3 three‑position switches, 2 momentary switches, 1 VR knob switch, and 1 rotary switch, fully satisfying multi‑mode control for aerial photography and fine gimbal operation. The rounded, comfortable grip and well‑placed switches keep you comfortable during long flying sessions.

Three‑Position Switch

Momentary Switch

Three‑Position Switch

VR Knob Switch

High-frequency

Module Base

Type-C Port: For Charge, Upgrade, Simulator Function, Tainer Function

Memory Expansion Port(Up to 64GB)

Rotary Switch

Three‑Position Switch

Momentary Switch

Old Equipment, New Vitality

Compatible with all RadioLink T-series Receivers


Compatible with dozens of receivers including R16F, R16SM, R12F, R8FGH, R8EF, R8FM, R8SM, R8XM, R8FG, R7FG, R6FG, R6F, and R4FGM. Upgrading to the T12S requires no replacement of any receivers or other peripherals—plug and play, seamless integration. Enjoy the freeRTOS intelligent system, high-definition color screen, voice broadcast, and other cutting-edge technologies while your existing equipment investment continues to generate value, avoiding the additional expenses of duplicate purchases.


User-Centered Design


Radiolink has always cared about the user experience. With more than 23 years of independent Research and Development, RadioLink has accumulated rich product knowledge and technical reserves.

Continuous software upgrades have allowed old products, such as AT9 and RC3S owners, to enjoy cutting-edge technologies and functions.


* All data of T12S are tested in a closed environment in favorable conditions with an unobstructed wireless signal. Actual results may vary depending on the environment, usage, and firmware version.

* While using T12S, if you have some questions about it, you can view the instructions, tutorials, or FAQ to get the answers.

* After viewing all the tutorials, you can consult us via after_service@radiolink.com.cn if you still have questions about the operation.


T12S Packing List

T12S(Transmitter)*1

R16F(Receiver)*1

Engine Voltage Telemetry Connect Cable*1

R16F to the TELEM1 port of CrossFlight*1

R16F CH16 to RC IN port of CrossFlight*1

R16F CH14&15 to TELEM2 port of CrossFlight*1

Type-C Cable(Upgrade)*1

Lanyard*1

Hook and Spring*1

User Manual*1

Carrying Bag*1

More Accessories * Choose What You Need