搜索结果建议

    快速链接

    Specifications

    Weight & Dimension
    Dimension
    37*37mm(1.46”*1.46”)
     
    Weight
    12.2g(0.43oz), 42.8g(1.5oz when all the connect wires included)
    Hardware
    Processor
    STM32H743
     
    Schedule Loop Rate
    1000HZ
     
    Frequency
    480MHz
    Sensor
    Gyro & Accelerometer
    BMI270
     
    Barometer
    SPL06
     
    FRAM
    128M
     
    Buzzer
    1
     
    Switch
    None
    Connector
    Type
    Combining socket interfaces and soldering pads, Support DJI/CADDX HD Digital Video Transmission Plug-and-play
     
    ESC Connector
    10PIN ESC connector, support voltage and current monitor, and ESC telemetry
     
    BEC
    5V&12V Dual BEC Built-in
     
    Channel Output
    12 channels Output
     
    Mavlink UART
    2(without RTS/CTS)
     
    USB Port
    1(Type-C)
     
    GPS UART/I2C Port
    1
     
    Signal Input
    PPM/SBUS/CRSF
     
    RSSI Output
    Support
     
    OSD Module
    OSD Module Integrated
     
    ESC Protocol
    PWM, DShot, and OneShot Protocol
     
    RTK
    Support
     
    Redevelopment
    Do not support
     Power Supply
    Input Voltage
    2-6S
     
    Input Current
    5A
     
    Relay(12V BEC)
    A switch can be set as the 12V BEC switch, which is used to turn on or off the image transmission power supply by the transmitter directly.
    Operating Paramteters
    USB Voltage
    5V±0.3V
     
    Operating Voltage
    -30~85℃