How to output the RSSI value from the receiver to FPV when the transmitter is an AT9S Pro, AT9S, AT9, AT10II, or AT10, the flight controller is a PIX6, PIXHAWK, CrossFlight-CE, CrossFlight, CrossRace Pro, CrossRace, Mini Pix?
The equipment for this tutorial manual is:
Transmitter: AT9S Pro, AT9S, AT9, AT10II, AT10
Receiver: R12DS, R12DSE, R12DSM, R9DS, R6DS, R6DSM
Flight Controller: PIX6, PIXHAWK, CrossFlight-CE, CrossFlight, CrossRace Pro, CrossRace, Mini Pix
Step 1：Download the latest firmware and upgrade via the link below
https://www.radiolink.com/at9spro_firmwares
Step 2: Enter the setup menu and choose “AUX-CH”
Step 3: Enter and select the channel you don’t use, then change it to RSSI. Take CH10, for example.
Step 4: When transmitter parameters are set, the setup is finished. Connect your aircraft/flight controller with your computer, and bind the transmitter with your aircraft/receiver.
Step 5: Open Mission Planner and make sure the flight controller is well connected with the correct Baud rate.
Step 6: CONFIG/TUNING => Full Parameter List => Input RSSI to search = > Change RSSI_TYPE to 2 => Change RSSI_CHANNEL TO 6 => Write Params
Step 7: When parameters change, power on the transmitter and change the distance between the transmitter and the aircraft to see if the servo range of CH8 changes. If changed, then set with success.
INITIALSETUP => Mandatory Hardware => FailSafe
How to output the RSSI value from the receiver to FPV when the transmitter is an AT9S Pro, AT9S, AT9, AT10II, or AT10, the flight controller is an F4, F7, F722, or F405?
http://www.radiolink.com.cn/attransmitter_betaflight_rssi_output
How to output the RSSI value from the receiver to FPV when the transmitter is a T16D, T12D, T8FB, T8S, the flight controller is an F4, F7, F722, or F405?
http://www.radiolink.com.cn/ttransmitter_betaflight_rssi_output
How to output the RSSI value from the receiver to FPV when the transmitter is an AT9S Pro, AT9S, AT9, AT10II, or AT10, the flight controller is a PIX6, PIXHAWK, CrossFlight-CE, CrossFlight, CrossRace Pro, CrossRace, Mini Pix?
http://www.radiolink.com.cn/attransmitter_pixhawk_rssi_output
How to output the RSSI value from the receiver to FPV when the transmitter is a T16D, T12D, T8FB, T8S, the flight controller is a PIX6, PIXHAWK, CrossFlight-CE, CrossFlight, CrossRace Pro, CrossRace, Mini Pix?
http://www.radiolink.com.cn/ttransmitter_pixhawk_rssi_output