PIX6 Mission Planner and Latest Firmware

1. Download and install Mission Planner


(1) Latest Mission Planner from ArduPilot

Attention: If you can not download the files when clicked above, please click the website below to download the files you need.

Mission Planner: http://www.radiolink.com.cn/firmware/MissionPlanner/

(2) Latest Mission Planner from RadioLink

2. Latest Firmware


① The PIX6 is default with Multicopter Firmware.

② Do not support the open-source firmware versions 4.5 and the versions before 4.5.

③ Download links for the firmware of each model.

Multicopter: https://firmware.ardupilot.org/Copter/stable/RadiolinkPIX6/arducopter.apj

Helicopter: https://firmware.ardupilot.org/Copter/stable/RadiolinkPIX6-heli/arducopter-heli.apj

Airplane: https://firmware.ardupilot.org/Plane/stable/RadiolinkPIX6/arduplane.apj

Car and boat: https://firmware.ardupilot.org/Rover/stable/RadiolinkPIX6/ardurover.apj

Antenna Tracker: https://firmware.ardupilot.org/AntennaTracker/stable/RadiolinkPIX6/antennatracker.apj

Attention: Flashing firmware for different drone models to the flight controller will reset all current parameters, while flashing different versions of firmware for the same model will not. To preserve flight controller parameters, please export and save them first.