T12D Specifications

Dimension: 
174.3*206.9*106.9mm(6.86"*8.15"*4.21")
Battery Case Dimension: 
114.4*35.4*32mm(4.5"*1.39"*1.26")
Antenna Length: 
90mm(3.54")
Weight: 
536g(18.9oz)
Channels: 
12 fully proportional channels, all 12 channels can be programmed
Output Frequency: 
2.4GHz ISM band(2400MHz~2483.5MHz)
Spread Spectrum: 
FHSS 67 channels pseudo-random frequency hopping
Operating Systems: 
freeRTOS+LVGL GUI
Long-range Module: 
it fully supports ELRS, TBS Crossfire, and other mainstream long-range modules
Response Latency: 
3ms, 4ms, 14ms can be selected
Channel Resolution:
4096 with regular jitter of 0.25us
Modulation Mode: 
GFSK
Channel Band Width: 
400KHz
Channel Pacing: 
1200KHz
Transmitter Power: 
<100mW(20dBm)
Adjacent Channel Rejection: 
>36dBm
Transmission Rate: 
38kbps
Reception Sensitivity:
-104dBm
PWM Output Range: 
875-2125
Cycle: 
15ms/per frame
Operating Voltage: 
7.4-15.0V(8pcs AA battery, a 2S-3S LiPo or 18650 Lithium battery)
Type-C Port Specifications:
Input Voltage: 5 V(T12D can also be powered by a computer or a mobile power bank via Type-C cable)
Input Current: 500mA
Output Voltage: 4.6V-5.0V
Output Current: Maximum 1A
Operating Current: 
100mA(±10mA)@8.4VDC
Control Distance:
① FHSS: 4000 meters in the air(Maximum range is tested in an unobstructed area free of interference)
② CRSF: Depends on the RX and TX of the long-range module
Adaptable Models: 
Helicopter, Fixed-wing, Glider, Multicopter, Car, Boat, Robot
Signal Output: 
PWM&SBUS&PPM&CRSF
Low Voltage Alarm: 
Low transmitter voltage, low receiver voltage, low model battery voltage, or low RSSI alarm can be customized
Storage Model Quantity: 
50
Storage Subsidiary ID Models Quantity: 
16
Simulator Mode: 
Beyond traditional simulators like Phoenix, the T16D features built-in simulator support (requires a firmware upgrade to V1.7.1). With no external dongle needed, connect to your computer via a Type-C cable to seamlessly support open-source simulators such as TRYP FPV, AeroFly, Uncrashed, Liftoff, FPV LOGIC, and Velocidrone - compatible with macOS and Windows systems.
Trainer Function:
Support
Screen: 
2.8 inches, 16 colorful screens, 320*240 pixels
Compatible Receivers: 
R12F(Std), R16F, R16SM, R8EF, R8FM, R8SM, R8XM, R8FGH, R8FG, R7FG, R6FG, R6F, R4FGM, R4F
Operating Temperature: 
-30° to 85° C
Compatible Control Board Hardware Models:
Ardupilot, pix4, beta, Arduino, and Raspberry Pi, can be connected with SBUS signal

R12F Specifications

Dimensions: 
35.6*25*13.6(1.4"*0.98"*0.54")
Weight: 
11.8g (0.42”)
Antenna Length: 
205mm (8.07”)
Channel: 
12 channels
Operating Voltage:
3-12V
Operating Current: 
37±3mA@5V
Signal Output: 
SBUS+CRSF+PWM
Output Frequency:
2.4GHz ISM band(2400MHz~2483.5MHz)
Spread Spectrum: 
FHSS 67 channels pseudo-random frequency hopping
Channel Resolution:
4096 with regular jitter of 0.25us
Adaptable Models:
Helicopter, Fixed-wing, Glider, Multicopter, Car, Boat, Robot
Control Distance: 
4000 meters in the air(Maximum range is tested in an unobstructed area free of interference)
Upgrade Online: 
With a Type-C cable (for data transmission) connecting the R12F to the computer, the latest cutting-edge functions can be easily added without any extra devices.
Response Latency: 
3ms, 4ms, 14ms can be selected
Simulator Function:
R12F comes with a built-in PC Game Joystick communication program(requires a firmware upgrade to V1.7), so it supports the latest simulator by connecting to the computer directly via Type-C port, such as TRYP FPV, AeroFly, Uncrashed, liftoff, FPV LOGIC, Velocidrone (Black Sheep Simulator), and other open-source simulators. No additional power is needed for the receiver. It can be used on both Apple and Windows computers.
Operating Temperature: 
-30° to 85° C
Compatible transmitter: 
T16D, T12D, T8FB, T8S, RC8X, RC6GS V3, RC4GS V3, RC6GS V2, RC4GS V2, RC6GS, RC4GS