Dimension:
180*95*220mm (7.1”* 3.7”* 8.7”)
Battery Case Dimension:
115*32*30.5mm(L*W*H=4.53"*1.26"*1.2")
Weight:
0.95kg(2.1 lb)
Frequency:
2.4GHz ISM band (2400MHz to 2483.5MHz)
Modulation Mode:
QPSK
Channel Bandwidth:
5.0 MHz
Spread Spectrum:
DSSS&FHSS
Adjacent Channel Rejection:
>38dBm
Transmitter Power:
<100mW (20dBm)
Operating Current:
<105mA
Operating Voltage:
7.4~15.0V(8pcs AA batteries, LiPo battery(2S-3S), 18650 Lithium, Li-ion, NiMH or NiCad battery)
Control Distance:
More than 4000 meters air, the actual control distance depends on the flying environment
Channel Quantity:
12 channels, all 12 channels can be customized
Adaptable Models:
Include all 120-degree and 90-degree swash-plate helicopters, all fixed wings, gliders, multirotors, RC cars, RC boats, and robots
Signal Output:
PWM, SBUS, PPM
Low Voltage Alarm:
Low transmitter voltage, low receiver voltage, low model battery voltage, or low RSSI alarm can be customized
Storage Model Quantity:
15
Simulator Mode:
Yes, with the radio frequency off to save battery power
Screen:
3.5 inches, 16 colorful screens, 320*480 pixels
Compatible Receivers:
R12DS(Standard), R12DSE, R12DSM, R9DS, R6DS, R6DSM
Supported Control Board Hardware Models:
Ardupilot, pix4, beta, Arduino, and Raspberry Pi, can be connected with SBUS signal
Operating Temperature:
-30° to 85° C

AT10II Specifications

R12DS Specifications

Dimensions:
50*32*14.5mm (1.97"*1.24"*0.57")
Antenna Length:
215mm (8.46”)
Weight:
14g (0.49oz)
Channels Quantity:
11 channels for PWM signal output,
12 channels for SBUS and PWM signal output.
Signals Output:
PWM/SBUS&PWM
Operating Voltage:
3-10V
Operating Current:
38-45mA@5V
Frequencies Band:
2.4GHz ISM(2400MHz~2483.5MHz）
Spread Spectrum Mode:
DSSS&FHSS
Section Precision:
4096, 0.25us per section
Applicable Models:
Helicopter, Fixed-wing, Glider, Multicopter, Car, Boat, Robot
Control Distance:
4000 meters(2.49 miles) in the air, the maximum range tested in unobstructed areas free of interference and may vary depending on local regulations.
Telemetry:
Connect PRM-01 for model voltage telemetry.
Connect PRM-03 and flight controller PIX6, PIXHAWK, CrossFlight-CE, CrossFlight, CrossRace Pro, CrossRace, Mini Pix, TURBO PiX, or APM for OSD information telemetry.
Compatible Transmitter:
AT10II, AT10, AT9S Pro, AT9S, AT9